News

PP Compression Fitting

Published by shentong 2024-08-03

PP Compression Fitting

 

Product introduction and performance characteristics of quick connect fittings

 

Performance of quick connect fittings:

 

1. Quick connect fittings have good tensile and compressive strength, but their flexibility is not as good as other plastic pipes, and their corrosion resistance is excellent. They are cheap among various types of plastic pipes, but brittle at low temperatures. They are used for bonding, socket rubber ring connection, flange thread connection, and are used for residential life, industrial and mining, agricultural water supply and drainage, irrigation, gas supply, exhaust pipes, wire conduits, rainwater pipes, industrial anti-corrosion pipes, etc.

 

2. Outstanding heat resistance, with a thermal deformation temperature of 100 ℃, excellent chemical resistance, adhesive and flange threaded connection for hot water pipes.

 

PE pipe: lightweight, good toughness, good low-temperature resistance, non-toxic, inexpensive, high impact strength, but low compressive and tensile strength. Hot melt welding, flange threaded connection for drinking water pipes, rainwater pipes, gas pipes, industrial corrosion-resistant pipes

 

3. Quick connect fittings have good corrosion resistance, good strength, high surface hardness, surface smoothness, and certain high temperature resistance. They are used as heating pipes for indoor concrete floors in heating systems, including hot melt welding, flange threaded connections for chemical wastewater, seawater, oil, and irrigation pipelines.

 

Technical characteristics of quick connect fittings:

 

1. One time injection molding, beautiful structure, and excellent production process

 

2. Convenient connection, shortened construction period, and fast connection

 

According to the available injection molding materials, polypropylene and polyethylene can be used for injection molding of PP quick connect fittings and PE quick connect fittings

 

Performance of quick connect fittings:

 

1. Quick connect fittings have good tensile and compressive strength, but their flexibility is not as good as other plastic pipes, and their corrosion resistance is excellent. They are cheap among various types of plastic pipes, but brittle at low temperatures. They are used for bonding, socket rubber ring connection, flange thread connection, and are used for residential life, industrial and mining, agricultural water supply and drainage, irrigation, gas supply, exhaust pipes, wire conduits, rainwater pipes, industrial anti-corrosion pipes, etc.

 

2. Quick connect fittings have outstanding heat resistance, with a thermal deformation temperature of 100 ℃ and excellent chemical resistance. They are bonded and connected to hot water pipes with flange threads.

 

PE pipes: lightweight, good toughness, good low-temperature resistance, non-toxic, inexpensive, high impact strength, but low compressive and tensile strength. Hot melt welding, flange threaded connection for drinking water pipes, rainwater pipes, gas pipes, and industrial corrosion-resistant pipes.

 

3. Good corrosion resistance, with good strength, high surface hardness, surface smoothness, and certain high-temperature resistance. Hot melt welding, flange threaded connection for chemical wastewater, seawater, oil, and irrigation pipes, used as heating pipes for indoor concrete floors in heating systems.

 

Technical characteristics of quick connect fittings:

 

1. One time injection molding, beautiful structure, and excellent production process

 

2. Convenient connection, shortened construction period, and fast connection

 

Installation method for quick connect fittings:

 

1. Cut the end of the pipe flat and free from plastic foam and other debris;

 

2. Install each component of the pipe fittings onto the pipe in sequence.

 

3. Special reminder: (1) The length of the leaked pipe at the front end of the sealing ring should be between 5-10mm, and it can only be within the specified range based on the pipe diameter. (2) The inclined section of the pressure ring is facing the steel clamp. If the installation direction is incorrect, it is easy to cause the pipe fitting to not be able to withstand high pressure. (3) When installing, remember to tightly grip the steel clamp with your hands to keep the sealing and pressure ring positions from sliding. Install the pipe inside the pipe fitting, otherwise it is easy to cause the pipe to enter the pipe fitting for too long, which will affect the performance:

 

4. After the installation of the quick connect pipe fittings is completed, use a special wrench to tighten it

Copyright 2022 Shijiazhuang shentong plastic Industry Co.,LTD.
Sitemap Support: Magig Lamp